Filter
Top Products
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 41
4 ACL Commands
ip access-list
The ip access-list Global Configuration mode command enables the IP-Access
Configuration mode and creates Layer 3 ACLs. To delete an ACL, use the
no form of this
command.
Syntax
ip access-list name
no ip access-list
name
Parameters
• name — Specifies the name of the ACL. (Range: 0-32 characters)
Default Configuration
The default for all ACLs is deny-all.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example shows how to create an IP ACL.
Console(config)#
ip access-list
ip-acl1
Console(config-ip-al)#