Filter
Top Products
Address Table Commands
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 25
Command Modes
Interface Configuration (VLAN) mode
User Guidelines
Before defining forbidden ports, the multicast group should be registered.
Example
In this example, MAC address 0100.5e02.0203 is forbidden on port 2 within VLAN 8.
bridge multicast forward-all
The bridge multicast forward-all Interface Configuration (VLAN) mode command
enables forwarding all multicast packets on a port. To restore the default configuration,
use the no form of this command.
Syntax
bridge multicast forward-all {add | remove} {ethernet interface-list | port-channel port-
channel-number-list}
no bridge multicast forward-all
Parameters
• add — Force forwarding all multicast packets.
• remove — Do not force forwarding all multicast packets.
• interface-list — Separate nonconsecutive Ethernet ports with a comma and no spaces;
a hyphen is used to designate a range of ports.
• port-channel-number-list — Separates nonconsecutive port-channels with a comma
and no spaces; a hyphen is used to designate a range of port-channels.
Default Configuration
This setting is disabled.
Command Mode
Console(config)#
interface vlan
8
Console(config-if)#
bridge multicast address
0100.5e.02.0203
Console(config-if)#
bridge multicast forbidden address
0100.5e02.0203
add ethernet
ext.2