Filter
Top Products
User Interface Commands
Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 345
27 User Interface Commands
enable
The enable User EXEC mode command enters the Privileged EXEC mode.
Syntax
enable [privilege-level]
Parameters
• privilege-level — Privilege level to enter the system. (Range: 1-15)
Default Configuration
The default privilege level is 15.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enters Privileged EXEC mode:
disable
The disable Privileged EXEC mode command returns to the User EXEC mode.
Console> enable
enter password:
Console#