Filter
Top Products
QoS Commands
182 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines.
Example
The following example displays the parameters of the aggregate policer called policer1.
police aggregate
The police aggregate Policy-map Class Configuration mode command applies an
aggregate policer to multiple classes within the same policy map. To remove an existing
aggregate policer from a policy map, use the
no form of this command.
Syntax
police aggregate aggregate-policer-name
no police aggregate
aggregate-policer-name
Parameters
• aggregate-policer-name — Specifies the name of the aggregate policer.
·Default Configuration
This command has no default configuration.
Command Mode
Policy-map Class Configuration mode
Console> show qos aggregate-policer policer1
aggregate-policer policer1 96000 4800 exceed-action drop
not used by any policy map