Filter
Top Products
AAA Commands
12 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
Syntax
login authentication {default | list-name}
no login authentication
Parameters
• default — Uses the default list created with the aaa authentication login command.
• list-name — Uses the indicated list created with the aaa authentication login
command.
Default Configuration
Uses the default set with the command aaa authentication login.
Command Mode
Line Configuration mode
User Guidelines
To change (or rename) an authentication method, use the negate command and create a
new rule with the new method name.
Example
The following example specifies the default authentication method for a console.
enable authentication
The enable authentication Line Configuration mode command specifies the
authentication method list when accessing a higher privilege level from a remote Telnet or
console. To restore the default configuration specified by the
aaa authentication enable
command, use the no form of this command.
Syntax
enable authentication {default | list-name}
no enable authentication
Console(config)# line console
Console(config-line)# login authentication default