Filter
Top Products
Address Table Commands
38 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide
Example
In this example, all classes of entries in the port-lock status are displayed:
The following table describes the fields shown above.
show ports security addresses
The show ports security addresses Privileged EXEC mode command displays the current
dynamic addresses in locked ports.
Syntax
show ports security addresses [ethernet interface | port-channel port-channel-number]
Parameters
• interface — A valid Ethernet port.
• port-channel-number — A valid port-channel number
Default Configuration
This command has no default configuration.
Console#
show ports security
Port Status Learning Action Maximum Trap Frequency
---- ------- -------- ------- ------- ------- ---------
1 Locked Dynamic Discard 3 Enable 100
2 Unlocked Dynamic - 28 - -
3 Locked Disabled Discard,
Shutdown
8 Disable -
Field Description
Port The port number.
Status The values are: Locked/Unlocked.
Learning The learning mode.
Action Action on violation.
Maximum The maximum number of addresses that can be associated on this port in
theStatic Learning mode or in the Dynamic Learning mode.
Trap Sends traps in case of a violation.
Frequency The minimum time interval between consecutive traps.