Mitsubishi Electronics Q64TCTTBWN Network Card User Manual


 
204
(7) Setting alert modes and alert set values
Settings of the alert mode and alert set value are described below.
(a) Alert mode
Set the alert mode. Up to four modes can be set for each channel. Set them in the following buffer memory
areas.
Each alert mode for alert 1 to 4 corresponds to alert set value 1 to 4.
(b) Alert set value
Set the value where CH Alert 1 (b8 of Un\G5 to Un\G8) to CH Alert 4 (b11 of Un\G5 to Un\G8) turns on
according to the set alert mode. Up to four values can be set for each channel. Set them in the following buffer
memory areas.
Alert set value 1 to 4 corresponds to each alert mode for alert 1 to 4.
Buffer memory area name
Buffer memory address
Reference
CH1 CH2 CH3 CH4
CH Alert 1 mode setting Un\G192 Un\G208 Un\G224 Un\G240
Page 137, Section 3.4.2 (52)
CH Alert 2 mode setting Un\G193 Un\G209 Un\G225 Un\G241
CH Alert 3 mode setting Un\G194 Un\G210 Un\G226 Un\G242
CH Alert 4 mode setting Un\G195 Un\G211 Un\G227 Un\G243
Buffer memory area name
Buffer memory address
Reference
CH1 CH2 CH3 CH4
CH Alert set value 1 Un\G38 Un\G70 Un\G102 Un\G134
Page 108, Section 3.4.2 (18)
CH Alert set value 2 Un\G39 Un\G71 Un\G103 Un\G135
CH Alert set value 3 Un\G40 Un\G72 Un\G104 Un\G136
CH Alert set value 4 Un\G41 Un\G73 Un\G105 Un\G137