Filter
Top Products
30
: Applicable, ×: N/A
*1 Limited within the range of I/O points for the CPU module.
*2 Can be installed to any I/O slot of a base unit.
*3 Connection of an extension base unit is not available with any safety CPU.
Remark
To use a C controller module with the Q64TCN, refer to the C Controller Module User's Manual.
(a) When mounted on a MELSECNET/H remote I/O station
The following table lists the network modules and base units applicable to the Q64TCN and the number of
mountable Q64TCN.
Depending on the combination with other modules or the number of mounted modules, power supply capacity
may be insufficient.
Select the power supply capacity according to the module to be used. If the power supply capacity is
insufficient, change the combination of the modules.
: Applicable, ×: N/A
*1 Limited within the range of I/O points for the network module.
*2 Can be installed to any I/O slot of a base unit.
Remark
The Basic model QCPU or C Controller module cannot configure the MELSECNET/ H remote I/O net.
Programmable
controller CPU
Universal model
QCPU
Q03UDECPU
Up to 64 Up to 32
Q04UDEHCPU
Q06UDEHCPU
Q10UDEHCPU
Q13UDEHCPU
Q20UDEHCPU
Q26UDEHCPU
Q50UDEHCPU
Q100UDEHCPU
Safety CPU QS001CPU N/A N/A ×
×
*3
C Controller module
Q06CCPU-V
Up to 64 Up to 32Q06CCPU-V-B
Q12DCCPU-V
Applicable
network module
Number of modules
*1
Applicable base unit
*2
Q64TCTTN/
Q64TCRTN
Q64TCTTBWN/Q
64TCRTBWN
Main base unit of
remote I/O station
Extension base unit
of remote I/O station
QJ72LP25-25
Up to 64 Up to 32
QJ72LP25G
QJ72LP25GE
QJ72BR15
Applicable CPU module
Number of modules
*1
Applicable base unit
*2
CPU type CPU model
Q64TCTTN/
Q64TCRTN
Q64TCTTBWN/
Q64TCRTBWN
Main base
unit
Extension
base unit