Filter
Top Products
49
CHAPTER 3 SPECIFICATIONS
3
3.3 I/O Signals Transferred to/from the CPU Module
3.3.1 I/O signal list
(2) Output signal list
*1 Available only under the heating-cooling control (expanded mode). For details on the expanded mode, refer to
Page 164, Section 4.1 (3).
*2 Available only under the mix control (expanded mode). For details on the expanded mode, refer to Page 164,
Section 4.1 (3).
The functions of the Q64TCN cannot be guaranteed if any of the unavailable areas is turned on/off in a sequence program.
Output signal (signal direction: CPU module Q64TCN)
Device No. Standard control Heating-cooling control Mix control
Yn0 N/A N/A N/A
Yn1 Setting/operation mode instruction Setting/operation mode instruction Setting/operation mode instruction
Yn2 Error reset instruction Error reset instruction Error reset instruction
Yn3 N/A N/A N/A
Yn4 CH1 Auto tuning instruction CH1 Auto tuning instruction CH1 Auto tuning instruction
Yn5 CH2 Auto tuning instruction CH2 Auto tuning instruction
CH2 Auto tuning instruction
*2
Yn6 CH3 Auto tuning instruction
CH3 Auto tuning instruction
*1
CH3 Auto tuning instruction
Yn7 CH4 Auto tuning instruction
CH4 Auto tuning instruction
*1
CH4 Auto tuning instruction
Yn8
E
2
PROM backup instruction E
2
PROM backup instruction E
2
PROM backup instruction
Yn9 Default setting registration instruction Default setting registration instruction Default setting registration instruction
YnA N/A N/A N/A
YnB Setting change instruction Setting change instruction Setting change instruction
YnC
CH1 PID control forced stop
instruction
CH1 PID control forced stop
instruction
CH1 PID control forced stop
instruction
YnD
CH2 PID control forced stop
instruction
CH2 PID control forced stop
instruction
CH2 PID control forced stop
instruction
*2
YnE
CH3 PID control forced stop
instruction
CH3 PID control forced stop
instruction
*1
CH3 PID control forced stop
instruction
YnF
CH4 PID control forced stop
instruction
CH4 PID control forced stop
instruction
*1
CH4 PID control forced stop
instruction