Mitsubishi Electronics Q64TCTTBWN Network Card User Manual


 
376
(2) Comparison of I/O signals
The same I/O signals can be used for the Q64TCN in the standard control and the Q64TC.
(3) Comparison of buffer memory
The same buffer memory areas can be used for the Q64TCN in the standard control and the Q64TC.
Buffer memory addresses are written in hexadecimal in the Q64TC manual
*1
, while they are written in decimal (Intelligent
function module device (Un\G)) in this manual.
Although the addresses are differently written, buffer memory areas with the same function have the same address.
*1 Temperature Control Module User's Manual
Forward/reverse action selection
function
Loop disconnection detection
function
During AT loop disconnection
detection function
×
Proportional band setting function ×
Cooling method setting function ×
Overlap/dead band function ×
Temperature conversion function
(using unused channels)
×
Heater disconnection detection
function
Output off-time current error
detection function
Buffer memory data backup function
Error history function ×
Module error history collection
function
×
Error clear function ×
Function Q64TC Q64TCN Remarks