Mitsubishi Electronics Q64TCTTBWN Network Card User Manual


 
222
4.17 ON Delay Output Function
This function allows the user to set the delay (response/scan time delay) of transistor output. By setting a delay, and
monitoring the ON delay output flag and external output on the program, disconnection of external output can be
determined. The following figure is an example using the ON delay flag.
(1) Setting method
Set a value in the following buffer memory area.
Transistor output monitor ON delay time setting (Un\G175) ( Page 132, Section 3.4.2 (45))
(Scan time delay)
CPU module Q64TCN Input module
Disconnection is determined
based on the ON/OFF status
of the contact of the input module
and ON delay output flag.
Sensor ON/OFF status
Transistor output
(Response delay)
External
current
sensor
Heater