Mitsubishi Electronics Q64TCTTBWN Network Card User Manual


 
357
CHAPTER 7 PROGRAMMING
7
7.3 When Using the Module on the Remote I/O Net
Program that executes the auto tuning and backs up the PID constants in E
2
PROM if the auto tuning is
normally completed (The auto tuning is stopped when an alert is detected.)
CH1 Input range: 2
CH1 Alert 1 mode setting
: Upper input alert
Setting change instruction: ON
Setting change instruction: OFF
Flag 2 for setting value write: ON
CH1 Alert set value 1: 250
CH1 Set value (SV) setting: 200
CH1 Upper limit setting limiter: 400
CH1 Lower limit setting limiter: 0
Flag 2 for setting value write: OFF
Flag 1 for setting value write: OFF
CH1 Auto tuning instruction: ON
CH1 Auto tuning instruction: OFF
CH1 Auto tuning instruction: OFF
CH1 Auto tuning completion flag: ON
E
2
PROM backup instruction: ON
E
2
PROM backup instruction: OFF
CH1 Auto tuning completion
flag: OFF