Mitsubishi Electronics Q64TCTTBWN Network Card User Manual


 
320
(2) Programming condition
Program example where the peak current suppression function is used
This program is designed to suppress the peak current by automatically changing the values of the upper
limit output limiter of CH1 to CH4 and dividing the timing of the transistor output into four timing.
20s
CH1
Transistor
output
CH2
Transistor
output
CH3
Transistor
output
CH4
Transistor
output
Peak current Peak current
CH1
Transistor
output
CH2
Transistor
output
CH3
Transistor
output
CH4
Transistor
output
Since all the transistor outputs used
turn on at the same time, the peak
current becomes high.
5s
20s
5s 5s 5s
When the peak current suppression
control function is not used
When the peak current suppression
control function is used
Setting the transistor outputs to
different ON timings can reduce
the peak current to that of one
transistor output.