Filter
Top Products
351
CHAPTER 7 PROGRAMMING
7
7.3 When Using the Module on the Remote I/O Net
7. Perform auto tuning.
Set the "Automatic backup setting after auto tuning of PID constants" to "ON" and perform the auto tuning.
[Tool] [Intelligent Function Module Tool] [Temperature Control Module]
[Auto Tuning...] "Q64TCTTN"
(b) Devices used by a user
Device Description
X22 Error code reset instruction
QX42 (X20 to X5F)
X23 Operation mode setting instruction
X24
E
2
PROM's PID constants read instruction
X1010 Module READY flag
Q64TCTTN (X1010 to X101F)
X1012 Write error flag
Y60 to Y6F Error code output QY42P (Y60 to Y9F)
Y1011 Setting/operation mode instruction
Q64TCTTN (Y1010 to Y101F)
Y1012 Error reset instruction
Y1018
E
2
PROM backup instruction
Y101B Setting change instruction
D9
Write data storage device using Z(P). REMTO instruction (for E
2
PROM's PID constants read)
D10
Read data storage device using Z(P). REMFR instruction (for E
2
PROM's PID constants read)
D11
Write data storage device using Z(P). REMTO instruction (for E
2
PROM's PID constants read)
M300 to M305
CH1 E
2
PROM's PID constants read flag
M310, M311 Z(P). REMTO instruction completion/result device
M312, M313 Z(P). REMFR instruction completion/result device
M314, M315 Z(P). REMTO instruction completion/result device
W1150 Write data error code
Devices where data is written by
auto refresh
W1151 CH1 Temperature process value (PV)
W1155 CH1 Alert definition