Filter
Top Products
S/UNI-QUAD
PMC-Sierra, Inc.
PM5349 S/UNI-QUAD
DATASHEET
PMC-971239 ISSUE 6 SATURN USER NETWORK INTERFACE (155-QUAD)
Proprietary and Confidential to PMC-Sierra, Inc., and for its Customers’ Internal Use
176
Register 0xE1: RASE Interrupt Status
Bit Type Function Default
Bit 7 R PSBFI X
Bit 6 R COAPSI X
Bit 5 R Z1/S1I X
Bit 4 R SFBERI X
Bit 3 R SDBERI X
Bit 2 R SFBERV X
Bit 1 R SDBERV X
Bit 0 R PSBFV X
PSBFV:
The PSBFV bit indicates the protection switching byte failure alarm state. The
alarm is declared (PSBFV is set high) when twelve successive frames have
been received without three consecutive frames containing identical K1 bytes.
The alarm is removed (PSBFV is set low) when three consecutive frames
containing identical K1 bytes have been received.
SDBERV:
The SDBERV bit indicates the signal degrade threshold crossing alarm state.
The alarm is declared (SDBERV is set high) when the bit error rate exceeds
the threshold programmed in the RASE SD Declaring Threshold registers.
The alarm is removed (SDBERV is set low) when the bit error rate is below
the threshold programmed in the RASE SD Clearing Threshold registers.
SFBERV:
The SFBERV bit indicates the signal failure threshold crossing alarm state.
The alarm is declared (SFBERV is set high) when the bit error rate exceeds
the threshold programmed in the RASE SF Declaring Threshold registers.
The alarm is removed (SFBERV is set low) when the bit error rate is below
the threshold programmed in the RASE SF Clearing Threshold registers.
SDBERI:
The SDBERI bit is set high when the signal degrade threshold crossing alarm
is declared or removed. This bit is cleared when the RASE Interrupt Status
register is read.