PMC-Sierra PM5349 Network Router User Manual


 
S/UNI-QUAD
PMC-Sierra, Inc.
PM5349 S/UNI-QUAD
DATASHEET
PMC-971239 ISSUE 6 SATURN USER NETWORK INTERFACE (155-QUAD)
Proprietary and Confidential to PMC-Sierra, Inc., and for its Customers’ Internal Use
3
Provides a differential TTL serial interface (can be adapted to PECL levels) at
155.52 Mbit/s.
Provides a single transmit frame pulse input across the four channels to align
the transport frames to a system reference.
Provides a single transmit byte clock (divide by eight of the synthesized line
rate clock) to provide a timing reference for the transmit outputs.
Optionally inserts register programmable APS (K1, K2) and synchronization
status (S1) bytes.
Optionally inserts path alarm indication signal (PAIS), path remote defect
indication (PRDI), line alarm indication signal (LAIS) and line remote defect
indication (LRDI).
Inserts path BIP-8 codes (B3), path far end block error (G1) indications, line
BIP-24 codes (B2), line far end block error (M1) indications, and section BIP-8
codes (B1) to allow performance monitoring at the far end.
Scrambles the transmitted STS-3c (STM-1) stream and inserts the framing
bytes (A1, A2).
Inserts ATM cells into the transmitted STS-3c (STM-1) synchronous payload
envelope.
1.5
The Transmit ATM Processor
Provides idle/unassigned cell insertion.
Provides HCS generation/insertion, and ATM cell payload scrambling.
Counts number of transmitted and idle cells.
Provides a synchronous 8-bit wide, four cell FIFO buffer.