Filter
Top Products
Printing Using The Optional Document Feeder
85
2
E Press the
{
{{
{
Enter
}
}}
}
key.
F Enter the desired number of
prints for the second original
with the Number keys.
G Press the
{
{{
{
Enter
}
}}
}
key.
Note
❒
Repeat steps F and G for each
original.
❒
The number of prints for up to
20 originals can be stored.
H Press the
[
OK
]
key.
I Set your originals face up in the
document feeder.
Note
❒
The originals are fed from the
top of the stack. Make sure that
the originals are set in the cor-
rect sequence with the first orig-
inal on the top.
J Press the
{
{{
{
Start
}
}}
}
key.
K Check the image position of the
trial or proof print.
Note
❒
If the image position is not cor-
rect, adjust it using the
[
Image
=
]
key (see
⇒
P.25 “Adjusting
Print Image Position”).
L Press the
{
{{
{
Auto Cycle
}
}}
}
key.
Note
❒
In Auto Cycle mode, printing
starts automatically after a trial
print is delivered.
Program Clear Modes
Auto Cycle
Proof
Print
Enter
Start
Clear/Stop
TPES020N
Program Clear Modes
Auto Cycle
Proof
Print
Enter
Start
Clear/Stop
TPES040N
TPEH350E
Program Clear Modes
Auto Cycle
Proof
Print
Enter
Start
Clear/Stop
TPES050N
Program Clear Modes
Auto Cycle
Proof
Print
Enter
Start
Clear/Stop
TPES150N