Filter
Top Products
OPTIONAL FUNCTIONS
106
2
❒
To change the value entered,
press the
{
Clear/Stop
}
key and
enter the new value.
J After you have finished designat-
ing modes for all the command
sheets, select
[
Outside Area
]
with
the
[←
←←
←]
,
[→
→→
→]
,
{
{{
{
~
~~
~
}
}}
}
, or
{
{{
{
}
}}
}
}
}}
}
key.
Then press the
[
OK
]
key.
K Select the mode for the outside
area with the
[←
←←
←]
,
[→
→→
→]
,
{
{{
{
~
~~
~
}
}}
}
, or
{
{{
{
}
}}
}
}
}}
}
key.
L Press the
[
OK
]
key.
Note
❒
When you select Photo mode
for both inside and outside ar-
eas, you cannot select different
coarseness and image density.
❒
When you want to confirm your
settings, press the
{
Make-Up
}
key twice. Then press the
[
OK
]
key repeatedly until the panel
display reaches the setting you
want to confirm.
M If you have selected Photo mode,
select the coarseness and the im-
age density with the
[←
←←
←]
,
[→
→→
→]
,
{
~
}
, or
{
{{
{
}
}}
}
}
}}
}
key.
Note
❒
Four coarseness settings are
available:
• Setting 4: coarsest
• Setting 3: coarser than setting
2
• Setting 2: coarser than setting
1
• Setting 1: coarser than the
standard setting
N Press the
[
OK
]
key.
O Set the first command sheet face
down on the exposure glass (con-
tact glass) and press the
{
{{
{
Start
}
}}
}
key.
The beeper sounds after the com-
mand sheet is scanned.
Note
❒
Repeat step O for the other com-
mand sheets.
P Set the original face down on the
exposure glass (contact glass) and
press the
{
{{
{
Start
}
}}
}
key.
TPES530E
TPES530E
TPES530E
Program Clear Modes
Auto Cycle
Proof
Print
Enter
Start
Clear/Stop
TPES050N