Filter
Top Products
What To Do If Something Goes Wrong
188
4
Black Line/Stain
Check the platen cover and clean it if
dirty. See
⇒
P.196 “Platen Cover”.
Check the exposure glass (contact
glass) and clean it if dirty. See
⇒
P.196
“Exposure glass (contact glass)”.
Check the sheet of the optional docu-
ment feeder and clean it if dirty. See
⇒
P.197 “Sheet”.
Note
❒
When black lines or stains still ap-
pear on prints even if you clean the
above, contact your service repre-
sentative.
Skipped Prints
If the machine is not used for a long
period of time or you change the color
drum unit, the ink on the drum might
dry causing print quality to deterio-
rate. To solve this problem, use Qual-
ity Start Mode. See
⇒
P.76 “Quality
Start Mode— Regaining The Image Den-
sity When The Ink On The Drum Dries”.
When you get skipped print images
even if you use Quality Start mode,
perform the following procedure.
A Open the front cover and pull out
the drum unit.
Reference
See
⇒
P.87 “Changing The Color
Drum Unit”.
B While pressing the drum lock,
grasp the edge of the master
(white part of the master) and
peel it off.
C Return the drum lock to its origi-
nal position.
D Set the drum unit until it clicks in
position and close the front cover.
TPEH101E
TPEH200E
TPEH091E