Filter
Top Products
User Tools Menu
143
3
18 Ink/Master
Left
Specifies whether you can check the amount of ink and
master.
Note
❒
Default: OFF
❒
Available settings:
• OFF (You cannot check the remaining amount of ink
or master.)
• ON (When the remaining amount of ink or master is
less than half, the panel display indicates these
amounts when you turn on the main switch.)
• Check remaining volume (You can see the remaining
amounts of ink and master regardless of these
amounts.)
19 Type of Paper When one kind of paper misfeeds occur frequently, you
can register its paper type in [
User 1
] or [
User 2
].
Reference
For how to register special paper type, see
⇒
P.154 “4-
19 Type of Paper”.
20 Auto Rotation When the direction in which your original is set is different
from that of the paper, and your machine is equipped with
the optional memory board, the machine automatically ro-
tates the original image by 90
°
to match the paper direction.
You can cancel this setting.
Note
❒
Default: ON
21 Master Cut
Length
The machine determines the master length according to the
original set number in the optional document feeder and
the paper sizes. If you wish to use A3/11"
×
17" master re-
gardless of the original set number and the paper sizes, se-
lect “A3”.
Note
❒
Default: Auto
No. Mode Description