Filter
Top Products
Manual Class Mode With One Original—Making Variable Numbers Of Prints From The Same Original
57
1
E Press the
{
{{
{
Enter
}
}}
}
key.
F Enter the desired number of
prints for the second set with the
Number keys.
G Press the
{
{{
{
Enter
}
}}
}
key.
Note
❒
Repeat steps F and G for each
set.
❒
The maximum number of sets
that can be made is 20.
H Press the
[
OK
]
key.
I Set one original on the exposure
glass (contact glass) or in the op-
tional document feeder.
J Press the
{
{{
{
Start
}
}}
}
key.
K Check the image position of the
trial or proof print.
Note
❒
If the image position is not cor-
rect, adjust it using the
[
Image
=
]
key (see
⇒
P.25 “Adjusting
Print Image Position”.)
L Make your prints.
Program Clear Modes
Auto Cycle
Proof
Print
Enter
Start
Clear/Stop
TPES020N
Program Clear Modes
Auto Cycle
Proof
Print
Enter
Start
Clear/Stop
TPES040N
Program Clear Modes
Auto Cycle
Proof
Print
Enter
Start
Clear/Stop
TPES050N