Filter
Top Products
User Codes
19
1
User Codes
Preparation
You have to turn on User Code
mode and register your user code
with the user tools. You can regis-
ter up to 20 user codes. See “Set
User Code”, “Reg. User Code”, in
⇒
P.146 “6. Set User Code (s)”.
If the machine is set to use the User
Code function, operators must input
their user codes before the machine
can be operated. The machine keeps
count of the number of copies made
under each user code. See “Set User
Code”, “Reg. User Code”, in
⇒
P.146
“6. Set User Code (s)”.
Note
❒
When the machine is set for user
codes, the machine will prompt
you for your user codes when you
turn the main switch on or when
auto reset comes into effect.
A Input your user code (4 digits)
with the Number keys.
Note
❒
User codes are not displayed on
the panel display.
❒
To change the number entered,
press the
{
Clear/Stop
}
key and
enter the new number.
B Press the
{
{{
{
Enter
}
}}
}
key.
C Make your prints.
D To prevent others from making
prints with your user code, hold
the
{
{{
{
Clear Modes
}
}}
}
key, then press
the
{
{{
{
Clear/Stop
}
}}
}
key.
Program Clear Modes
Auto Cycle
Proof
Print
Enter
Start
Clear/Stop
TPES020N
Program Clear Modes
Auto Cycle
Proof
Print
Enter
Start
Clear/Stop
TPES030N