Filter
Top Products
Job Separation—Separating Printing Sets On The Paper Delivery Tray
77
1
Job Separation—Separating Printing Sets
On The Paper Delivery Tray
The print on the top of each print set on the paper delivery tray is pulled by the
job separator. This function is useful when you make 2 or more print sets.
R
CAUTION:
Limitation
❒
In Job Separation mode, the following limitations apply:
❖
❖❖
❖
Metric version
❖
❖❖
❖
Inch version
Note
❒
When you use thin paper, it is not recommended to use Job Separation mode.
The job separator might tear the paper.
❒
If the job separator touches the print image, the completed prints might be
dirty. In this case, it is not recommended to use Job Separation mode.
❒
When you do not use Job Separation mode, you can select the machine con-
dition after each printing set is fed out to the paper delivery tray with the user
tools. See “Manual Class” in
⇒
P.139 “4. Mode Setting”.
•
While printing, do not touch the belt at the end of the paper deliv-
ery tray or the job separator. You might be injured.
Minimum paper size Maximum paper weight Paper delivery tray capacity
Length: 210 mm
Width: 128 mm
127.9 g/m
2
600 sheets (64 g/m
2
)
Minimum paper size Maximum paper weight Paper delivery tray capacity
Length: 8.3"
Width: 5.1"
34 lb 600 sheets (17 lb)
GRJOBS0E