Filter
Top Products
Index
© National Instruments Corporation Index-7 VXI-MXI User Manual
R
RDY bit, 4-8
registers
description format, 4-1
hard reset, 4-1
MXIbus defined registers
Drive Triggers/Read LA Register,
4-39 to 4-40, 6-2
Interrupt Status/Control Register,
4-45 to 4-47
IRQ Acknowledge Registers, 4-51
MXIbus IRQ Configuration Register,
4-37 to 4-38
MXIbus Lock Register, 4-36
MXIbus Status/Control Register,
4-31 to 4-35
MXIbus Trigger Configuration
Register, 4-49
Status/ID Register, 4-48, 6-4
Trigger Asynchronous Acknowledge
Register, 4-50
Trigger Mode Selection Register,
4-41 to 4-44, 6-2
Trigger Synchronous Acknowledge
Register, 4-50
register maps, 4-2 to 4-3
resets, 4-1
sizes, 4-1
soft reset, 4-1
VXIbus configuration registers
Device Type Register, 4-6
VXIbus ID Register, 4-4 to 4-5
VXIbus Status/Control Register,
4-7 to 4-8
VXIbus extender registers
A16 Window Map Register, 4-14
to 4-17
A24 Window Map Register, 4-18
to 4-21
A32 Window Map Register, 4-22
to 4-25
INTX Interrupt Configuration
Register, 2-8, 4-26
INTX Trigger Configuration
Register, 2-8, 4-27
INTX Utility Configuration Register,
2-8, 4-28 to 4-29
Logical Address Window Register,
4-10 to 4-13
MODID Register, 4-9
Subclass Register, 4-30
request level, VMEbus, 3-7 to 3-8
requester and arbiter circuitry, VMEbus,
2-5, 6-2
RESET bit, 4-8
reset signal, configuration, 3-23
resets
hard and soft resets for registers, 4-1
INTX daughter card control, 6-9
RM operation. See multiframe RM
operation.
S
S[15-0] bits, 4-48
Semi-synchronous protocol, 6-3
signals
INTX daughter card
signal assignments, D-3
signal groupings, D-4
MXIbus
signal assignments, D-1
signal groupings, D-2
VMEbus signals
list of signals, 2-1 to 2-2
VXI-MXI support for, 1-4 to 1-5
Size configuration format, 5-3 to 5-4
slave mode state machine. See MXIbus
slave mode state machine.
Slot 0
CLK10 signal requirement, 3-18
configuration, 3-4 to 3-5
damage warning, 3-4
default settings, 3-4
device requirements, 3-5
interlocked arbitration mode, 3-13
non-Slot 0 selection, 3-5
VMEbus System Controller, 3-5
soft resets, 4-1
specifications
electrical, A-2
environmental, A-2 to A-3
MXIbus capability codes, A-2
other, A-3
physical, A-3
reliability, A-3
requirements, A-3
timing, A-3
VMEbus capability codes, A-1
VXIbus capability codes, A-1
SSIE bit, 4-44
SSINT* bit, 4-44
Start/Stop protocol, 6-3
Status/ID Register, 4-48, 6-4