Filter
Top Products
DC and Switching Characteristics
26 www.xilinx.com DS610-3 (v2.0) July 16, 2007
Product Specification
R
Table 21:
Input Timing Adjustments by IOSTANDARD
Convert Input Time from
LVCMOS25 to the Following
Signal Standard
(IOSTANDARD)
Add the
Adjustment Below
Units
Speed Grade
-5 -4
Single-Ended Standards
LVTTL 0.62 0.62 ns
LVCMOS33 0.54 0.54 ns
LVCMOS25 0.00 0.00 ns
LVCMOS18 0.83 0.83 ns
LVCMOS15 0.60 0.60 ns
LVCMOS12 0.31 0.31 ns
PCI33_3 0.41 0.41 ns
PCI66_3 0.41 0.41 ns
PCIX 0.41 0.41 ns
HSTL_I 0.72 0.72 ns
HSTL_III 0.77 0.77 ns
HSTL_I_18 0.69 0.69 ns
HSTL_II_18 0.69 0.69 ns
HSTL_III_18 0.79 0.79 ns
SSTL18_I 0.71 0.71 ns
SSTL18_II 0.71 0.71 ns
SSTL2_I 0.68 0.68 ns
SSTL2_II 0.68 0.68 ns
SSTL3_I 0.78 0.78 ns
SSTL3_II 0.78 0.78 ns
Differential Standards
LVDS_25 0.76 0.76 ns
LVDS_33 0.79 0.79 ns
BLVDS_25 0.79 0.79 ns
MINI_LVDS_25 0.78 0.78 ns
MINI_LVDS_33 0.79 0.79 ns
LVPECL_25 0.78 0.78 ns
LVPECL_33 0.79 0.79 ns
RSDS_25 0.79 0.79 ns
RSDS_33 0.77 0.77 ns
TMDS_33 0.79 0.79 ns
PPDS_25 0.79 0.79 ns
PPDS_33 0.79 0.79 ns
DIFF_HSTL_I_18 0.74 0.74 ns
DIFF_HSTL_II_18 0.72 0.72 ns
DIFF_HSTL_III_18 1.05 1.05 ns
DIFF_HSTL_I 0.72 0.72 ns
DIFF_HSTL_III 1.05 1.05 ns
DIFF_SSTL18_I 0.71 0.71 ns
DIFF_SSTL18_II 0.71 0.71 ns
DIFF_SSTL2_I 0.74 0.74 ns
DIFF_SSTL2_II 0.75 0.75 ns
DIFF_SSTL3_I 1.06 1.06 ns
DIFF_SSTL3_II 1.06 1.06 ns
Notes:
1. The numbers in this table are tested using the methodology
presented in Table 25 and are based on the operating conditions
set forth in Table 7, Table 10, and Table 12.
2. These adjustments are used to convert input path times originally
specified for the LVCMOS25 standard to times that correspond to
other signal standards.
Table 21:
Input Timing Adjustments by IOSTANDARD
Convert Input Time from
LVCMOS25 to the Following
Signal Standard
(IOSTANDARD)
Add the
Adjustment Below
Units
Speed Grade
-5 -4