Filter
Top Products
DC and Switching Characteristics
44 www.xilinx.com DS610-3 (v2.0) July 16, 2007
Product Specification
R
Phase Shifter (PS)
Miscellaneous DCM Timing
Table 39:
Recommended Operating Conditions for the PS in Variable Phase Mode
Symbol Description
Speed Grade
Units
-5 -4
Min Max Min Max
Operating Frequency Ranges
PSCLK_FREQ
(F
PSCLK
)
Frequency for the PSCLK input 1 167 1 167 MHz
Input Pulse Requirements
PSCLK_PULSE PSCLK pulse width as a percentage of the PSCLK period 40% 60% 40% 60%
-
Table 40:
Switching Characteristics for the PS in Variable Phase Mode
Symbol Description Phase Shift Amount Units
Phase Shifting Range
MAX_STEPS
(2)
Maximum allowed number of
DCM_DELAY_STEP steps for a given
CLKIN clock period, where T = CLKIN
clock period in ns. If using
CLKIN_DIVIDE_BY_2 = TRUE,
double the clock effective clock
period.
CLKIN < 60 MHz
±[INTEGER(10 • (T
CLKIN
– 3 ns))] steps
CLKIN
≥ 60 MHz
±[INTEGER(15 • (T
CLKIN
– 3 ns))]
FINE_SHIFT_RANGE_MIN Minimum guaranteed delay for variable phase shifting ±[MAX_STEPS •
DCM_DELAY_STEP_MIN]
ns
FINE_SHIFT_RANGE_MAX Maximum guaranteed delay for variable phase shifting ±[MAX_STEPS •
DCM_DELAY_STEP_MAX]
ns
Notes:
1. The numbers in this table are based on the operating conditions set forth in Table 7 and Table 39.
2. The maximum variable phase shift range, MAX_STEPS, is only valid when the DCM is has no initial fixed phase shifting, that is, the
PHASE_SHIFT attribute is set to 0.
3. The DCM_DELAY_STEP values are provided at the bottom of Table 36.
Table 41:
Miscellaneous DCM Timing
Symbol Description Min Max Units
DCM_RST_PW_MIN Minimum duration of a RST pulse width 3
-CLKIN
cycles