Filter
Top Products
Disassembly, Reassembly and Lubrication
3-33 CL-S6621
BH, M3x4 (NI)
BH, M3x4 (NI)
Sheet Insulation Power PCB
Unit, Power Supply
Cover Power PCB
Plate Power PCB
Spacer (fai3.5 7xL4mm)
6. Remove the 1 screws (BH, M3x4 (NI)) and detach the “Cover Power PCB” by sliding it to
the left and then lifting it.
7. Remove the 4 screws (BH, M3x4 (NI)), and detach the “Unit, Power Supply” and the
“Spacer (fai3.5 7xL4mm)”.
8. Remove the “Sheet Insulation Power PCB” from the “Plate Power PCB”.
Note on reassembling:
• When assembling the “SA, Power SW Cable”, run the wires as shown in the magnified view
on the previous page. Pass the wires through the hook and, for the green earth wire, make a
1-turn loop around the hook as shown.