Filter
Top Products
Disassembly, Reassembly and Lubrication
3-45 CL-S6621
• When assembling the “Plate Holder Head” Block on the “SA Cover Frame” Block, follow the
next steps.
1) Insert the “Spring Head L” and “Spring Head R” on the “SA Cover Frame” Block. (See the
figure below.)
NOTE: The “Spring Head L” is shorter than the “Spring Head R”.
2) Align the “Plate Holder Head” Block so that the top ends of the “Spring Head L” and
“Spring Head R” are securely seated in the depressed parts “A” and “B”, respectively.
3) Gently press down the “Plate Holder Head” Block and then slide it in the direction of the
arrow so that the projections “C” of the “SA Cover Frame” Block are inserted in the slits
“C’ ”.
(3) Cam Head Adjust
1. In the “Plate Holder Head” Block, detach the “SA Head Adjust Lever” Block by pulling it out
from the “Plate Holder Head” Block. (They are simply connected with the “Spring Head
Holder”.)
Spring Head L
(Short one)
Spring Head R
(Long one)
A
B
C
C’
C
C’
"Plate Holder Head" Block
"SA Cover Frame" Block
Spring Head Holder
"SA Head Adjust Lever" Block
"Plate Holder Head" Block