Filter
Top Products
Disassembly, Reassembly and Lubrication
3-35 CL-S6621
3-6-14. SA2 Platen
1. Remove the “Unit, Mechanism”. Refer to “3-6-13(1) Unit, Mechanism”.
2. Open the “SA, Head” Block.
3. While pressing the part “A” of the “SA2 Platen”, lift the right end of the “SA2 Platen” a little.
(See the arrow “a”.)
Next, move it to the right and then remove it from the printer by lifting it upwardly. (See the
arrow “b”.)
Note on reassembling:
• After reassembling the “SA2 Platen”, be sure that it is securely engaged with the main body.
b
a
A
"SA, Head" block
SA2 Platen