Filter
Top Products
Error Message and Corrective Actions
CL-S6621 4-4
Causes/Corrective Actions PRINT LED CONDITION LED ERROR LED
Abnormal temperature raise of “SA
PF Motor” or “SA Ribbon Motor F”
• Printing will temporarily stop.
Wait until the motor gets cool.
Abnormal temperature raise of auto
cutter (Optional)
• Printing will temporarily stop.
Wait until the auto cutter gets
cool.
OFF
ON
OFF
ON
OFF
Abnormal head resistance
• Due to defective thermal
element:
Printing quality will degrade.
OFF
OFF
ON
OFF
ON
Communication error
• Reception buffer overrun
• Parity or framing error
• Transmission buffer overflow
OFF
OFF
ON
OFF
System error
• Overheat of “SA PF Motor”, “SA
Ribbon Motor F”, “SA, Head” or
the cutter motor (option)
• Overcurrent of “SA PF Motor”
OFF
OFF
ON
OFF
ON
Auto cutter abnormality (Optional)
• Jamming, etc.
OFF OFF
OFF
ON
Paper near end
* By default, issuing a paper near
end alarm is disabled. To enable
it, change the Paper Near End
Alarm submenu under the
“PageSetup” main menu from
Off to On.
ON OFF
OFF
ON