Filter
Top Products
Disassembly, Reassembly and Lubrication
3-15 CL-S6621
Notes on reassembling:
• When assembling the “Case U” Block, do not forget to open the Head Block and the “Knob
Guide Paper U”. Otherwise, the extended “Knob Guide Paper U” gets caught between the
“Case U” Block and the main body.
• After assembling the “Case U” Block, install the “Leaf Case U” as follows.
NOTE: While inserting the “Leaf Case U” (thin metal), carefully handle it so as not to
deform it.
1) While aligning both edges of the “Leaf Case U” with those of the part “A” (a part of the
“Case L”), insert the “Leaf Case U” into the main body (between the part “A” and the
“Case U” Block) until the ends of claws (4 pcs.) securely fit to the grooves (4 pcs.) on
the “Case U” Block.
NOTE: Do not insert it downward too much, as its stoppers will be bent.
2) To be sure if the “Leaf Case U” is securely inserted, move it a little. If the claws of the
“Leaf Case U” are securely engaged with the grooves of the “Case U” Block, the “Leaf
Case U” does not move.
ase U
Stopper part (5 pcs.)
Leaf Case U
Claw (4 pcs.)
Groove (4 pcs.)
"A"
Claw
Stopper part
("Case U" Block)
(Case L)
• Assemble the “Cover Cable” so that the hook of the main body is correctly inserted into the
rectangle hole of the “Cover Cable” as shown in the magnified view.
(to be continued on the next page)