Filter
Top Products
Disassembly, Reassembly and Lubrication
3-39 CL-S6621
FLOIL G-311S
BHT (PT), M2x6
BHT (PT), M2x6
Spacer, CR Shaft
E-Ring 3
Guide Paper U
Leaf Holder Adjust Sensor U
Nut, (#3), M2
Wave Washer
4x8xt0.15
Cover Guide Paper U
Shaft Lead Screw
Gear Bevel Lead Screw U
Gear Bevel Idle
Sensor U
Spacer Hinge Shaft
Spring Guide Paper U
Shaft Hinge Guide Paper U
E-Ring, 2.5
Guide Paper L
Pin Guide Paper U
Polyslider
8. Move the end “A” of the “Spring Guide Paper U” from “a” to “a’ “ to set the end free.
9. Disengage the “E-Ring, 2.5” () and pull out the “Shaft Hinge Guide Paper U” (), and then
remove the ”Wave Washer 4x8xt0.15”, “Polyslider”, “Spring Guide Paper U”, “Spacer Hinge
Shaft” and “Gear Bevel Idle Sensor U”.
10. Remove the 5 screws (BHT (PT), M2x6) () and detach the “Cover Guide Paper U”.
11. Disengage the “E-Ring 3” (), remove the “Spacer, CR Shaft”, and pull out the “Shaft Lead
Screw” from the “Gear Bevel Lead Screw U” and “Guide Paper U” Block.
12. Remove the 3 nuts ((#3), M2) () with a nut driver and detach the “Pin Guide Paper U” (3
pcs.), and then remove the “Leaf Holder Adjust Sensor U” from the “Guide Paper U”.
a
A
A
a’