Filter
Top Products
Configuring a Shared Guest Network
151
16.5.3. Configuring a Shared Guest Network
1. Log in to the CloudPlatform UI as administrator.
2. In the left navigation, choose Infrastructure.
3. On Zones, click View More.
4. Click the zone to which you want to add a guest network.
5. Click the Physical Network tab.
6. Click the physical network you want to work with.
7. On the Guest node of the diagram, click Configure.
8. Click the Network tab.
9. Click Add guest network.
The Add guest network window is displayed.
10. Specify the following:
• Name: The name of the network. This will be visible to the user.
• Description: The short description of the network that can be displayed to users.
• VLAN ID: The unique ID of the VLAN.
• Isolated VLAN ID: The unique ID of the Secondary Isolated VLAN.
Applies only to a Private VLAN setup.
• Scope: The available scopes are Domain, Account, Project, and All.
• Domain: Selecting Domain limits the scope of this guest network to the domain you specify.
The network will not be available for other domains. If you select Subdomain Access, the
guest network is available to all the sub domains within the selected domain.
• Account: The account for which the guest network is being created for. You must specify the
domain the account belongs to.
• Project: The project for which the guest network is being created for. You must specify the
domain the project belongs to.
• All: The guest network is available for all the domains, account, projects within the selected
zone.
• Network Offering: If the administrator has configured multiple network offerings, select the one
you want to use for this network.
• Gateway: The gateway that the guests should use.
• Netmask: The netmask in use on the subnet the guests will use.
• IP Range: A range of IP addresses that are accessible from the Internet and are assigned to the
guest VMs.