Filter
Top Products
Chapter 10. Setting Up Networking for Users
80
Supported Services Description Isolated Shared
been configured in
the cloud.
VPN For more information,
see Section 16.24,
“Remote Access
VPN”.
Supported Supported
User Data For more information,
see Section 20.3,
“User Data and Meta
Data”.
Not Supported Supported
Network ACL For more information,
see Section 16.27.4,
“Configuring Network
Access Control List”.
Supported Not Supported
Security Groups For more information,
see Section 16.6.4,
“Adding a Security
Group”.
Not Supported Supported
• System Offering. If the service provider for any of the services selected in Supported Services
is a virtual router, the System Offering field appears. Choose the system service offering that
you want virtual routers to use in this network. For example, if you selected Load Balancer in
Supported Services and selected a virtual router to provide load balancing, the System Offering
field appears so you can choose between the CloudPlatform default system service offering
and any custom system service offerings that have been defined by the CloudPlatform root
administrator.
For more information, see Section 9.2, “System Service Offerings”.
• LB Isolation: Specify what type of load balancer isolation you want for the network: Shared or
Dedicated.
Dedicated: If you select dedicated LB isolation, a dedicated load balancer device is assigned
for the network from the pool of dedicated load balancer devices provisioned in the zone. If
no sufficient dedicated load balancer devices are available in the zone, network creation fails.
Dedicated device is a good choice for the high-traffic networks that make full use of the device's
resources.
Shared: If you select shared LB isolation, a shared load balancer device is assigned for
the network from the pool of shared load balancer devices provisioned in the zone. While
provisioning CloudPlatform picks the shared load balancer device that is used by the least
number of accounts. Once the device reaches its maximum capacity, the device will not be
allocated to a new account.
• Mode: You can select either Inline mode or Side by Side mode:
Inline mode: Supported only for Juniper SRX firewall and BigF5 load balancer devices. In inline
mode, a firewall device is placed in front of a load balancing device. The firewall acts as the
gateway for all the incoming traffic, then redirect the load balancing traffic to the load balancer
behind it. The load balancer in this case will not have the direct access to the public network.