Filter
Top Products
Chapter 16. Managing Networks and Traffic
170
3. In Zones, click View More.
4. Choose the zone you want to work with.
5. Click the Physical Network tab, then click the name of the physical network.
6. In the Network Service Providers node of the diagram, click Configure.
You might have to scroll down to see this.
7. Click NetScaler.
8. Click Add NetScaler device and provide the following:
For NetScaler:
• IP Address: The IP address of the NetScaler appliance.
• Username/Password: The authentication credentials to access the device. CloudPlatform uses
these credentials to access the device.
• Type: The type of device that is being added. It could be F5 Big IP Load Balancer, NetScaler
VPX, NetScaler MPX, or NetScaler SDX. For a comparison of the NetScaler types, see the
CloudPlatform Administration Guide.
• Public interface: Interface of device that is configured to be part of the public network.
• Private interface: Interface of device that is configured to be part of the private network.
• GSLB service: Select this option.
• GSLB service Public IP: The public IP address of the NAT translator for a GSLB service that is
on a private network.
• GSLB service Private IP: The private IP of the GSLB service.
• Number of Retries. Number of times to attempt a command on the device before considering
the operation failed. Default is 2.
• Capacity: The number of networks the device can handle.
• Dedicated: When marked as dedicated, this device will be dedicated to a single account. When
Dedicated is checked, the value in the Capacity field has no significance implicitly, its value is 1.
9. Click OK.
16.9.2.3. Adding a GSLB Rule
1. Log in to the CloudPlatform UI as a domain administrator or user.
2. In the left navigation pane, click Region.
3. Select the region for which you want to create a GSLB rule.
4. In the Details tab, click View GSLB.
5. Click Add GSLB.
The Add GSLB page is displayed as follows: