Filter
Top Products
Adding a Private Gateway to a VPC
213
8. Specify the following:
• Physical Network: The physical network you have created in the zone.
• IP Address: The IP address associated with the VPC gateway.
• Gateway: The gateway through which the traffic is routed to and from the VPC.
• Netmask: The netmask associated with the VPC gateway.
• VLAN: The VLAN associated with the VPC gateway.
• Source NAT: Select this option to enable the source NAT service on the VPC private gateway.
See Section 16.27.5.1, “Source NAT on Private Gateway”.
• ACL: Controls both ingress and egress traffic on a VPC private gateway. By default, all the
traffic is blocked.
See Section 16.27.5.2, “ACL on Private Gateway”.
The new gateway appears in the list. You can repeat these steps to add more gateway for this
VPC.
16.27.5.1. Source NAT on Private Gateway
You might want to deploy multiple VPCs with the same super CIDR and guest tier CIDR. Therefore,
multiple guest VMs from different VPCs can have the same IPs to reach a enterprise data center
through the private gateway. In such cases, a NAT service need to be configured on the private