Filter
Top Products
c. Click <OK>.
The cloning image deployment process starts.
The process status can be checked in the Recent Operations area of the ROR console.
Clicking <Cancel> in the Recent Operations area displays a confirmation dialog and stops the process.
Note
Please note that canceling the deployment of a cloning image does not restore the destination server to the state before
the deployment took place.
- Deploying a cloning image to multiple destination servers
a. In the ROR console, select the [Image List] tab.
A list of cloning images is displayed under the cloning image list.
b. Right-click the cloning image to deploy and select [Deploy] from the popup menu.
The [Deploy a Cloning Image] dialog is displayed.
A server that can be deployed is displayed.
c. Check the checkbox of the server to deploy a cloning image to, and set the following items:
[Release from Maintenance Mode after deployment] checkbox
Enable this option to automatically release the destination server from maintenance mode after cloning image deployment.
If this option disabled, maintenance mode should be released manually after collecting the cloning image.
The [Server Name] column displays the names of each destination servers.
By default, server names (computer name or hostname) or physical server names are displayed.
The names specified in this column will be assigned to destination servers as their computer names (for Windows systems)
or system node names (for Linux systems).
Those names can be changed using the following procedure.
1. Double-click the [Server name after deployment] cell of a server.
The [Server name after deployment] cell becomes editable.
2. Enter a new server name.
[Windows]
A string composed of up to 63 alphanumeric characters, underscores, ("_"), and hyphens, ("-").
The string cannot be composed solely of numbers.
[Linux]
A string composed of up to 64 alphanumeric characters, and the following symbols:
"%", "+", ",", "-", ".", "/", ":", "=", "@", "_", "~"
Information
Since the entered server name is also used as the hostname of its corresponding destination server, it is recommended to
use only characters defined in RFC (Request For Comments) 952:
- Alphanumeric characters
- Hyphens, ("-")
- Periods, (".") [Linux]
d. Click <OK>.
The cloning image deployment process starts.
The process status can be checked in the Recent Operations area of the ROR console.
Clicking <Cancel> in the Recent Operations area displays a confirmation dialog and stops the process.
- 132 -