Filter
Top Products
WWPN 2
The second WWPN set on the HBA is displayed.
The WWPN should be set to the I/O address of each HBA (in descending order).
Therefore, for rack mount or tower servers, the order may not correspond with port number order described for the HBA.
Network Properties Area (VLAN)
The following information is not displayed for VM guests.
Index
The mounted position (index) of each network interface on the server is displayed.
Port VLAN
The port VLAN IDs set on the LAN switch ports connected to each network interface are displayed.
When connected to a PRIMERGY BX900/BX400 LAN switch blade operating in IBP mode, "(IBP)" is displayed.
Tagged VLAN
The tagged VLAN IDs set on the LAN switch ports connected to each network interface are displayed.
When connected to a PRIMERGY BX900/BX400 LAN switch blade operating in IBP mode, "(IBP)" is displayed.
Port Groups Area (IBP)
NIC Index
The mounted position (index) of each network interface on the server is displayed.
Group
The names of the port groups set on the LAN switch ports connected to each network interface (for LAN switch blades operating
in IBP mode) are displayed.
Only "-" is displayed under the following conditions.
- The corresponding LAN switch is not registered
- The corresponding LAN switch is not operating in IBP mode
- The corresponding LAN switch port has not been assigned to a port group
Monitoring Information
Timeout(sec)
The time-out value (in seconds) for ping monitoring is displayed.
Recovery method
The recovery performed when an error is detected is displayed.
Number of reboots
The number of times reboot is performed during recovery is displayed.
WWN Settings Area
The following information is not displayed for VM guests or servers other than SPARC Enterprise servers.
WWPN of port n (n:1-8)
The WWPN value of the port
n
is displayed.
Values set by users are reflected on WWPN.
Target CA WWPN
The WWPN for the CA connected to the port
n
is displayed.
- 176 -