Filter
Top Products
- Deleting VLAN IDs from LAN switch ports
Use the following procedure to delete VLAN IDs:
1. In the ROR console server resource tree, right-click the target LAN switch blade and select [Modify]-[Network Settings] from
the popup menu.
The [VLAN Settings] dialog is displayed.
2. To use this feature, the following settings must first be defined:
VLAN
Select "Change" and select the VLAN ID that has been changed.
Physical Port, Link Aggregation
Select [None] from the VLAN type of the port number to delete VLANs or link aggregation group name.
3. Click <OK>.
The VLAN ID is deleted.
9.4.3 Re-discovering LAN Switches
Newly added LAN switches can be discovered by re-executing LAN switch discovery.
For details on LAN switch discovery, refer to "Discovery" in "7.4.2 Registering LAN Switches".
9.5 Changing VM Management Software Settings
This section explains how to change VM management software settings.
The following settings can be changed.
- Location
- IP address
- User ID
- Password
Here the method for changing settings registered with Resource Orchestrator is explained.
Complete re-configuration within the VM management software admin console before performing this procedure.
Use the following procedure to change VM management software settings:
1. In the ROR console management software tree, right-click the target management software, and select [Modify]-[Registration
Settings] from the popup menu.
The [Modify Management Software(
name
) Settings] dialog is displayed.
The name of the selected VM management software is displayed in
name
.
2. Enter the following items:
Location
Select the location of the VM management software registration to change.
- If VM management software is installed on the admin server
Select [Admin Server].
- In other cases
Select [Other Server].
IP address
If [Other Server] was selected, enter the IP address of the server on which VM management software is installed.
- 77 -