Filter
Top Products
Popup Menu
Function
Menu Submenu
Update -
Updates a server.
Modify
Registration Settings Modifies a server's registration settings.
HBA address rename settings (*2)
Modifies the HBA address rename settings of a server.
Network Settings (*3, *4)
Modifies the network settings of a server.
Spare Server Settings (*2)
Modifies a server's recovery settings.
Maintenance Mode
Set
Places a server into maintenance mode.
Release
Sets a server to active mode.
Power
ON Powers on a server.
OFF
Powers off a server after shutting down its operating
system.
OFF (Forced)
Powers off a server without shutting down its operating
system.
Reboot
Reboots a server after shutting down its operating
system.
Reboot (Forced)
Reboots a server without shutting down its operating
system.
LED (*3)
ON
Turns the maintenance LED on.
OFF
Turns the maintenance LED off.
Hardware
Maintenance
Re-configure
Detects and re-configures the properties of a replaced
server.
Backup/Restore Restore
Restores a system image to a server.
Cloning Deploy
Deploys a cloning image to a server.
Console Screen (*5) -
Opens the server console.
External Management
Software (*6)
-
Opens external server management software.
Export (*7) Environmental Data
Exports environmental data collected from servers.
*1: Available only for PRIMERGY BX series and PRIMEQUEST servers.
*2: Available only for VM hosts when using PRIMEQUEST.
*3: Available only for PRIMERGY BX servers.
*4: Can only be selected for VM guests.
*5: When opening the L-Server console screen at the second time or later, a window for iRMC management may be opened instead of
the console screen. If an iRMC management screen is displayed, close that screen and then start the console screen again.
*6: Available only for PRIMERGY series, PRIMEQUEST, and SPARC Enterprise M series servers.
*7: This option is only available for chassis equipped with power monitoring capabilities.
Table A.5 Popup Menus Available for SPARC Enterprise Servers
Popup Menu
Function
Menu Submenu
Register
Server (*1) Registers a server.
Agent Register the agent.
Delete - Deletes a SPARC Enterprise server.
Update - Updates a SPARC Enterprise server.
- 159 -