Filter
Top Products
Latest System Image Area
The following information is not displayed for VM guests or SPARC Enterprise servers.
Version
The latest version of the system image is displayed.
Backup date
The date and time of the most recent system image backup is displayed.
Comments
Comments describing the system image are displayed.
Spare Server Settings Area
The following information is not displayed for VM guests.
Primary server
Displays the name of the physical server that will be replaced when server switchover occurs.
Active server
Displays the name of the physical server that is currently running.
Server switchover method
The method used to perform server switchover is displayed.
Server boot method
The boot type of the system disk is displayed.
Automatic server recovery
Shows whether automatic server recovery is enabled or not.
Network switchover
Shows whether network settings will be automatically adjusted during server switchover.
Force spare server to power off during switchover
The setting whether the spare server is turned off forcibly when switching over to the spare server is displayed.
Switch over to spare server running VM guests
The setting whether the server is switched to a VM host on which a VM guest exists is displayed.
Spare server
Displays the name of the physical server that will replace the current active server when server switchover occurs.
HBA Address Rename Settings Area
The following information is not displayed for VM guests or SPARC Enterprise servers.
WWNN
The WWNN set on the HBA is displayed.
WWPN 1
The first WWPN set on the HBA is displayed.
The WWPN should be set to the I/O address of each HBA (in descending order).
Therefore, for rack mount or tower servers, the order may not correspond with port number order described for the HBA.
- 175 -