Filter
Top Products
# /opt/FJSVrcvmr/bin/rcxadm mgrctl modify -port
name
=
number
<RETURN>
In a clustered manager configuration, bring offline all cluster resources except for the manager's shared disk and IP address, move
all cluster resources from the primary node to the secondary node, then execute the rcxadm mgrctl modify command on all the nodes
that are hosting cluster resources.
3. Restart manager services.
Start the manager referring to "2.1 Starting and Stopping the Manager" in the "Operation Guide VE".
Note
- When changing the "rcxweb" port, the following ports should be set to the same value.
- Admin client
Enter the "rcxweb" port in the Web browser URL used to log into Resource Orchestrator.
If this URL is bookmarked in the Web browser "Favorites", change the port set in the bookmark's URL.
- HBA address rename setup service
If the HBA address rename setup service is running, change the port number used to communicate with the admin server to the
"rcxweb" port according to "9.2.2 Changing the Port Number Used to Communicate with the Admin Server".
[Windows Manager]
- Change the ROR console shortcut on the manager
1. Open the following folder on the admin server.
Installation_folder
\SVROR\Manager
2. Right-click the "ROR Console" icon, and select [Properties] from the popup menu.
3. In the [Web Document] tab, change the port number set in the "URL" field (as shown below).
URL: https://localhost:23461/
4. Click <OK>.
- When changing the "nfagent" port, the following ports on managed servers should be set to the same value.
Set the "nfagent" port set on each managed server to the same value, according to the instructions given in "9.1.6 Changing Port
Numbers".
The system image and cloning images collected before the change can no longer be used, and should be deleted.
If necessary, re-collect system images and cloning images.
Related Services
Use the following procedure to change the port numbers used for the related services: However, the port numbers of the DHCP server and
the dhcpd service cannot be changed.
[Windows Manager]
1. Change the port numbers.
a. Open the Windows Registry Editor, and search for the following subkey:
- When using a 32-bit version of Windows:
Key name: HKEY_LOCAL_MACHINE\SOFTWARE\Fujitsu\SystemcastWizard\CLONE
- When using a 64-bit version of Windows:
Key name: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Fujitsu\SystemcastWizard\CLONE
b. Select "PortBase" from the registry entries under this subkey.
- 61 -