Filter
Top Products
When this setting is changed, the HBA address rename setup service automatically checks whether it can communicate with the new admin
server IP address.
Changing this setting also requires changing the port on the admin server side beforehand.
Change the IP address of the admin server according to "9.1.3 Changing Admin IP Addresses", and change the admin IP address for the
HBA address rename setup service according to step 12.
9.2.2 Changing the Port Number Used to Communicate with the Admin
Server
This section explains how to change the port used between the HBA address rename setup service and the admin server.
The HBA address rename setup service uses the "rcxweb" port to communicate with the admin server.
When this setting is changed, the HBA address rename setup service automatically checks whether it can communicate with the new admin
server IP address.
Changing this setting also requires changing the port on the admin server side beforehand.
Use the following procedure to change the port numbers used to communicate with the admin server:
1. Change the port number of the manager.
Change the "rcxweb" port number according to the instructions given in "8.2 Changing Port Numbers".
2.
Change the port number of the HBA address rename setup service.
Refer to "Chapter 6 Settings for the HBA address rename Setup Service" in the "Setup Guide VE", and change the port to the same
port number.
9.2.3 Changing the IP Address of the HBA address rename Server
This section explains how to change the IP address of the HBA address rename server.
Use the following procedure to change the IP address of the HBA address rename server.
1. Log in to the HBA address rename server with administrator authority.
2. Stop the HBA address rename setup service.
Stop the HBA address rename setup service according to "Chapter 6 Settings for the HBA address rename Setup Service" in the
"Setup Guide VE".
3. Change the IP address set within the operating system.
Change the IP address according to the OS manual.
4. Restart the HBA address rename setup service.
Start the HBA address rename setup service according to "Chapter 6 Settings for the HBA address rename Setup Service" in the
"Setup Guide VE".
9.3 Changing VIOM Registration Settings
Use the following procedure to perform setting changes for management software (VIOM).
1. In the ROR console management software tree, right-click the management software (VIOM), and select [Modify]-[Registration
Settings] from the popup menu.
The [Modify Management Software(VIOM) Settings] dialog is displayed.
2. To use this feature, the following settings must first be defined:
User ID
Enter the ID of a VIOM user account.
Password
Enter the password of the above VIOM user account.
- 73 -