Filter
Top Products
Installing Adapters
7. If you installed an EISA or ISA adapter, run the System
Configuration Utility program to reconfigure your server. If
you installed a PCI adapter, running this program is optional.
See Chapter 3, “Configuring Your Server” on page 39 for
instructions on running this program.
8. Go to Table 11 on page 284 and write the adapter name next to
the slot into which it is installed; then, return here.
9. Install software according to Chapter 2, “Installing Your
Software” on page 27 and your operating system and
application software documentation. Review the README files
on your software installation diskettes. These files contain
important information.
Verifying Compatibility between Network Adapters and Device Drivers
The PC Server 704 supports several types of network adapters. If
you are having trouble with the installation or operation of a
network adapter using OS/2 for SMP 2.11, ensure that the
network-adapter device driver supports dual processors. Refer to
your network-adapter documentation for additional information
about adapter compatibility requirements.
Chapter 4. Installing Options 149