IBM 704 Server User Manual


 
Installing the Side Covers
What to do next?
Installing an external option? — Go to “Connecting External
Options” on page 207.
No external options to install?
If you installed options during the initial setup of your
server, go to “Installation Checklist” on page 37 to complete
the installation procedure; then, return here.
If you installed hot-swap drives, you might need to update
your server configuration parameters.
If you removed memory modules or internal drives, you
must run the Setup program. See Chapter 3, “Configuring
Your Server” on page 39 for instructions.
If you removed an ISA or EISA adapter, you must run the
System Configuration Utility program. See Chapter 3,
“Configuring Your Server” on page 39 for instructions.
Device drivers to install? (The instructions that come with
the option will tell you if device drivers are required and
how to install them.) If you do not need to install any
device drivers or configure the system, your server is ready
to use.
206 PC Server 704 User's Handbook