Filter
Top Products
Removing the Side Covers
Removing the Side Covers
Before you begin:
Be sure you have:
Read “Electrical Safety” on page 75 and “Handling
Static-Sensitive Devices” on page 77 (or your safety booklet).
Turned off peripheral devices (see “Preparing to Install
Options” on page 78).
You must remove both side covers before you can remove the top
cover.
To remove either of the server side covers, do the following steps:
1. Unlock and remove any padlock 2 on the side cover.
2. Remove the three screws 1 from the back edge of the side
cover. Save the screws to reuse when you reinstall the cover.
Chapter 4. Installing Options 81