IBM 704 Server User Manual


 
Device Records
Table 8 (Page 1 of 2). System Configuration Utility Program Defaults and Changes
Menu Options Default Value New Value Additional Information
System Group
System Identification and Version Information
System Identification String None
Config and Overlay Version
BIOS Version String
MP Sec. Version 1.1
System Processor Status
1st Processor Status, Module 1 No failures detected
2nd Processor Status, Module 1 No failures detected
3rd Processor Status, Module 2 No failures detected
4th Processor Status, Module 2 No failures detected
System Performance
Power-on Speed Fast
Secondary IOAPIC control Disable
Memory Subsystem
Base Memory Option 640 KB
Shadowing ISA ROMs Options (Menu)
Extended Memory Options (Menu)
Peripheral Configuration Group
Automatic Configuration Enable
Onboard Disk Controllers
Onboard Floppy Controller Enable
Onboard Communications Devices
Serial Port 1 Configuration Serial Port 1 Address and IRQ
Serial Port 2 Configuration Serial Port 2 Address and IRQ
Parallel Port Configuration Parallel Port Address and IRQ
Parallel Port Mode Parallel port mode
Parallel Port DMA Valid only with ECP mode
Floppy Subsystem Group
Floppy drive A Options Size and capacity
Floppy drive B Options Size and capacity
Language Support Group
Language Support options Languages supported
Keyboard/Mouse Subsystem Group
NumLock Options Off at Boot
Typematic Speed Auto
Appendix A. Server Records 281