Filter
Top Products
System Configuration Utility
prevent damage to the original diskette. Your operating-system
documentation provides information on backing up diskettes.
Starting the System Configuration Utility Program
To access the System Configuration Utility program:
1. Insert the backup copy of the System Configuration Utility
program diskette into the diskette drive.
2. Turn on the system. Or, if the system is turned on, press
Ctrl+Alt+Del.
Or, at the DOS prompt for drive A, type SCU and press Enter.
The system begins the power-on self-test (POST). If you have
set a user password, the system prompts you to enter it.
Notes:
a. If a user password is set, you must enter it to access
the System Configuration Utility program. If you
have set user and administrative passwords, you can
enter either one.
b. If a configuration error occurs, a prompt appears
before the operating system starts (see “Configuration
Conflicts” on page 61).
3. Press Enter when the SCU title screen appears.
4. Follow the instructions on the Main Menu screen to view or
change the configuration. The remainder of this chapter
explains the menu selections. Refer to “Utilities” on page 51 for
information on the SCU utilities accessible from this screen.
Step 1: About System Configuration
Select About System Configuration for an overview of the program.
You can select from a menu for specific information about each
function.
You can also press F1 for on-line Help information while
performing a configuration function.
Chapter 3. Configuring Your Server 47