IBM 704 Server User Manual


 
The System Board
The System Board
The following simplified layout of the system board identifies server
components. You might need to refer to this figure before you
install hardware in your server, or when you record information in
the tables in “Installed Device Records” on page 280.
You might also need to refer to this figure when you set
configuration switches and jumpers on the system board.
1 Power control and status cable
2 +5V, +12V, and 3.3V power connectors (identical)
3 Diskette-drive connector
4 Front-panel connector
5 Not used
6 Memory-board connector
7 Secondary processor-board connector
8 Primary processor-board connector
9 Fan 1 connector (not used)
1 Fan 2 connector (inner chassis fan)
11 Hard disk drive LED 1 connector
288 PC Server 704 User's Handbook