Filter
Top Products
Setup Program
Online Help information is available on the right side of the screen
for each selection. To access menu-bar selections within the Setup
program, use the Right Arrow (→) or Left Arrow (←) key.
The Setup program consists of the following menu bar selections:
Main: Select this choice to set the System Time and Date. This
menu also allows you to view or change configuration settings for
diskette drives.
Advanced: This choice allows you to view the settings of integrated
peripherals, and identify the type and speed of the processors.
Security: Select this choice to set passwords.
Help: General help information is available by pressing F1.
Starting the Setup Program
To access the Setup program:
1. Remove all diskettes from the server.
2. Turn on the server and watch the screen. Be ready to act
quickly.
3. Immediately after the system initialization procedure begins and
before the IBM logo screen appears, the system prompts you to
Press <F1> if you want to run SETUP. As soon as you see that
prompt, press F1. If the Setup program screen does not appear,
restart your system and try again.
Note: If a configuration error occurs, a prompt appears before
the operating system starts (see “Configuration Conflicts”
on page 61).
4. If you have set a user or administrative password, the system
prompts you to enter it. If you have set both passwords, enter
either one.
5. Follow the instructions on the screen to view or change the
configuration.
You must correctly exit from the Setup program to save the
configuration information.
42 PC Server 704 User's Handbook